View N6153A_8984387.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

keysight technologies dvb-t/h with t2 x-series measurement application N6153A & w6153a technical overview
introduction C dvb-t/h/t2 rf transmitters, modulators, gap-fllers, tuners, or amplifers measurements C single frequency network measurement (supports pre-, post-, 0 db, and out-of-gi echo scenarios) C auto-detect demodulation parameters from tps decoding of dvb-t/h or from l1-signalling of dvb-t2 C dvb-t2 supports both single plp and multi-plp modes as well as siso and miso measurements C one-button tests with pass/fail limit per dvb-t, dvb-h, and dvb-t2 standards C hardkey/softkey manual user interface or scpi remote control C built-in, context-sensitive help C transportable license between x-series signal analyzers
03 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview key parameter setup C radio standard: dvb-t, dvb-h, and dvb-t2 (versions 1.1.1 and 1.2.1) channel bandwidth: 5/6/7 /8 mhz in dvb-t/h; 1.7/5/6/7 /8/10 mhz in dvb-t2 C fft mode: 2k/8k in dvb- t, 2k/4k/8k in dvb-h, 1k/2k/4k/8k/16k/32k in dvb- t2 C modulation: qpsk/16qam/64qam in dvb- t/h; qpsk,16/64/256qam in dvb-t2 C input: rf or analog iq (available in the pxa or mxa) for signal quality and modulation accuracy measurements the keysight technologies, inc. n/w6153a measurement application provides one-button, standards- based power and modulation analysis capabilities to help you with design - ing, evaluating, and manufacturing dvb-t/h/t2 modulators, transmit - ters, amplifers, tuners, and gap- fllers/repeaters. optional analog baseband iq inputs in the pxa or mxa signal analyzer provide you the fexibility to measure signal quality and mod- ulation accuracy with rf input or analog iq input. the n/w6153a measurement ap - plication is just one in a common library of more than 25 measurement applications in the keysight x-series. the keysight x-series is an evolu - tionary approach to signal analysis that spans instrumentation, measure - ments, and software. the x-series analyzers, with up - gradeable cpu, memory, disk drives, and i/o ports, enable you to keep your test assets current and extend instrument longevity. proven algo - rithms, 100% code-compatibility, and a common ui across the x-series create a consistent measurement framework for signal analysis that ensures repeatable results and measurement integrity so you can leverage your test system soft - ware through all phases of product development. in addition to fxed, perpetual licenses for our x-series measurement applications, we also offer transportable licenses which can increase the value of your invest - ment by allowing to you transport the application to multiple x-series analyzers. dvb-t/h with t2 measurement application
04 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview digital video broadcasting-terres - trial/handheld (dvb-t/h) is the eu - ropean-based consortium standard for broadcast transmission of digital terrestrial/handheld television. dvb-t dvb-t is a fexible system that al - lows networks to be designed for the delivery of compressed digital audio, video, and other data in an mpeg transport stream using ofdm modulation with concatenated chan - nel coding (i.e. cofdm). it is the most widely adopted digital terrestrial television broadcasting standard in the world and is deployed in more than 30 countries. in dvb-t, the use of ofdm modula - tion with appropriate guard interval allows optimal tradeoff between network topology and frequency effciency. the capacity for hierar - chical modulation can enable two completely separate data streams to transmit in a single signal which can be used to trade off bit rate versus ruggedness. dvb-t has the following technical characteristics that make it a very fexible system. dvb-h dvb-h is an extension of the dvb-t standard, which takes into account the handheld receivers specifc properties such as the small size, light weight, portability, and battery operation. dvb-h uses a time slicing technique which results in a large battery power saving effect, and introduces a multi - protocol encapsulation forward error correction (mpe-fec) scheme for reliable transmission in poor signal reception conditions. a transmission mode of 4k is defned in dvb-h to offer a tradeoff between the trans - mission cell size and mobile reception capabilities. the complexity of the dvb-t/h stan - dards demands fexibility and excel - lent modulation analysis for system development and evaluation. dvb-t2 the dvb-t2 standard, defned in etsi en 302 755, is an extension of the existing dvb-t standard, aim - ing to provide a minimum of 30% capacity increase over the dvb-t, improving single-frequency-network (sfn) performance, service specifc robustness, better error correction ability, and bandwidth and frequency fexibility. a new technology, called rotated constellation, is used and provides signifcant additional robustness in diffcult channels. dvb-t2 defnes two modes: mode a (single plp) and mode b (multi-plps). a multi-plps mechanism is provided to separately adjust the robustness of each deliv - ery service within a channel to meet the required reception conditions. furthermore, a receiver can save power by decoding only a single ser - vice rather than the entire multiplex of service. table 1. key parameters in dvb-t, dvb-h, and dvb-t2 standards dvb-t dvb-h dvb-t2 frequency vhf-iii (170 to 230 mhz) uhf-iv/v (470 to 862 mhz) vhf-iii (170 to 230 mhz) uhf-iv/v (470 to 862 mhz) l (1.452 to 1.492 ghz) vhf-iii (170 to 230 mhz) uhf-iv/v (470 to 862 mhz) bandwidth 5, 6, 7, 8 mhz 5, 6, 7, 8 mhz 1.7, 5, 6, 7, 8, 10 mhz modulation ofdm ofdm ofdm fft size 2k, 8k 2k, 4k, 8k 1k, 2k, 4k, 8k, 16k, 32k modulation format qpsk/16qam/64qam qpsk/16qam/64qam qpsk,16/64/256qam guard interval 1 /4, 1 /8, 1/16, 1/32 1 /4, 1 /8, 1/16, 1/32 1 /4, 19/256, 1 /8, 19/128, 1/16, 1/32, 1/128 fec convolution + reed solomon 1 /2, 2/3, 3 /4, 5/6, 7 /8 convolution + reed solomon 1 /2, 2/3, 3 /4, 5/6, 7 /8, and mpe-fec ldpc+bch 1 /2, 3/5/, 2/3, 3 /4, 4/5, 5/6 constellation rotation no no yes mimo support siso siso siso, miso stream mpeg-2 ts dvb-ipdc and mpeg-2 ts ts, gse, gcs, or gfps bit rate 4.976 ~ 31.668 mb/s 4.976 ~ 31.668 mb/s up to 50.34 mb/s other time slicing dvb-t/h standards overview
05 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview table 2. required rf transmitter measurements and the corresponding measurements in n/w6153a etsi tr101 290 v.1.2.1 paragraph # transmitter test n/w6153a dvb-t/h with t2 measurement application 9.1.1 rf frequency accuracy (precision) spectrum analyzer mode (marker counter function) 9.1.2 rf channel width (sampling frequency accuracy) spectrum analyzer mode (marker counter function) 9.1.3 symbol length measurement at rf (guard interval verifcation) spectrum analyzer mode (marker counter function) 9.2 selectivity modulation accuracy (ber view) 9.4 phase noise of local oscillators (lo) n/w9068a phase noise measurement application 9.5 rf/if signal power channel power 9.7 rf and if spectrum monitor spectrum 9.8 receiver sensitivity/dynamic range for a gaussian channel modulation accuracy (ber view) 9.9 equivalent noise degradation (end) modulation accuracy (ber view) 9.9.1 equivalent noise foor (enf) modulation accuracy (ber view) 9.10 linearity characterization (shoulder attenuation) channel power (shoulder attenuation view) 9.12 coherent interferer spectrum analyzer mode 9.13 ber vs c/n ratio by variation of transmitter power modulation accuracy (ber view) 9.14 ber vs c/n ratio by variation of gaussian noise power modulation accuracy (ber view) 9.15 ber before viterbi (inner) decoder modulation accuracy (ber view) 9.16 ber before rs (outer) decoder modulation accuracy (ber view) 9.17 ber after rs (outer) decoder modulation accuracy (ber view) 9.18.1 i/q analysis defnition na 9.18.2 modulation error ratio modulation accuracy (result metrics view) 9.18.3 system target error na 9.18.4 carrier suppression modulation accuracy (result metrics view) 9.18.5 amplitude imbalance modulation accuracy (result metrics view) 9.18.6 quadrature error modulation accuracy (result metrics view) 9.18.7 phase jitter modulation accuracy (result metrics view) transmitter tests the rf transmitter test requirements iru9%vwdqgdugvduhghoqhglqwkh etsi tr 101 290 standard. table 2 shows the required base station rf transmitter tests along with the cor - responding measurement applica - tions.
06 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview measurement details all of the rf transmitter measure - ments as defned by the dvb-t/h/t2 standard, as well as a wide range of additional measurements and analy - sis tools, are available with the press of a button (table 3). these measure - ments are fully remote-controllable via the iec/ieee bus or lan, using scpi commands. analog baseband measurements are available on the pxa or mxa signal analyzer equipped with bbiq hard - ware. supported baseband measure - ments include all of the modulation quality, power stat ccdf, and iq waveform measurements. table 3. one-button measurements provided by the n/w6153a measurement application technology dvb-t/h dvb-t2 measurements anne er uer attenuatn etrum mas t ana n aaent anne aent anne er etrum emssn mas er statst urus emssn muatn aura m m ea m stn ea m m m ea m stn ea m m ma errr ea ma errr stn ea ma errr m ase errr e ea ase errr e stn ea ase errr reuen errr errr er m mtue maane uarature errr e ase tter ra arrer suressn er rat ata er rat mm s suarrersreuen m ata m t m trestnt tat t t mtue s suarrers ase s suarrers e ru ea s suarrers ns anne muse resnse ne reuen netr test re st an e resuts en snan m mntr m s m urt
07 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview figure 1. dvb-t/h constellation and mer results figure 2. dvb-t/h iq error (quad view) figure 5. dvb-t2 l1 signaling view figure 4. dvb-t2 constellation and mer result view figure 6. dvb-t/h shoulder attenuation figure 3. dvb-t/h channel impulse response with peak table
08 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview key specifcations description pxa mxa exa cxa channel power 5.60 mhz integration bandwidth g%pqrp g%pqrp g%pqrp g%pqrp absolute power accuracy 20 to 30 c 0.61 db ( 0.19 db 95%) 0.82 db ( 0.23 db 95%) 0.94 db ( 0.27 db 95%) 1.33 db ( 0.61 db 95%) 0hdvxuhphqwprru g%p g%p g%p g%p channel power with shoulder attenuation view 5.60 mhz integration bandwidth ml 1 = C15.0 dbm (nom) ml 1 = C16.0 dbm (nom) ml 1 = C16.0 dbm (nom) ml 1 = C15.0 dbm (nom) dynamic range, relative offset frequency 7.61/ 2 mhz 97.8 db 92.2 db 86.9 db 84.6 db + 500 khz (102.8 db typ) (98.5 db typ) (94.0 db typ) (91.8 db typ) power statistics ccdf minimum power at rf input g%pqrp g%pqrp g%pqrp g%pqrp histogram resolution 0.01 db 0.01 db 0.01 db 0.01 db adjacent channel power minimum power at rf input; 0 to 55 c g%pqrp g%pqrp g%pqrp g%pqrp acpr accuracy 7.61 mhz noise bandwidth, method = ibw offset frequency 8 mhz 0.20 db 0.44 db 0.94 db 1.37 db spectrum emission mask 8 mhz integration bandwidth, rbw = 3.9 khz 4.0 mhz offset dynamic range, relative 97.8 db (102.8 db typ) 92.2 db (98.5 db typ) 86.9 db (94.0 db typ) 84.5 db (91.7 db typ) sensitivity, absolute C114.5 db (C118.5 dbm typ) C110.5 db (C115.5 dbm typ) C105.5 db (C111.5 dbm t yp) C102.5 db (C108.5 dbm typ) 1. ml (mixer level) is rf input power minus attenuation defnitions C specifcations describe the performance of parameters covered by the product warranty. C 95th percentile values indicate the breadth of the population (2) of performance tolerances expected to be met in 95% of cases with a 95% confdence. these values are not covered by the product warranty. C typical values are designated with the abbreviation "typ." these are performance beyond specifcation that 80% of the units exhibit with a 95% confdence. these values are not covered by the product warranty. C nominal values are designated with the abbreviation "nom." these values indicate expected performance, or describe product performance that is useful in the application of the product, but is not covered by the product warranty. C pxa specifcations apply to analyzers with frequency options of 526 and lower. for analyzers with higher frequency options, specifcations are not warranted but performance will nominally be close to that shown in this section. note: data subject to change
09 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview description pxa mxa exa cxa accuracy relative 0.10 db 0.18 db 0.18 db 0.27 db absolute, 20 to 30 c 0.62 db ( 0.20 db 95%) 0.88 db ( 0.23 db 95%) 1.05 db ( 0.31 db 95%) 1.53 db ( 0.64 db 95%) 10.0 mhz offset dynamic range, relative 100.2 db (105.1 db typ) 94.5 db (100.5 db typ) 89.2 db (95.9 db typ) 87.1 db (94.9 db typ) sensitivity, absolute rbw = 3.9 khz rbw = 100 khz C114.3 dbm (C118.3 dbm typ) C100.2 dbm (C104.2 dbm typ) C110.3 dbm (C115.3 dbm typ) C96.2 dbm (C101.2 dbm typ) C107.3 dbm (C111.3 dbm t yp) C93.2 dbm (C99.2 dbm typ) C102.3 dbm (C108.3 dbm typ) C88.2 dbm (C94.2 dbm typ) accuracy relative 0.12 db 0.21 db 0.21 db 0.36 db absolute 0.62 db ( 0.20 db 95%) 0.88 db ( 0.23 db 95%) 1.05 db ( 0.31 db 95%) 1.53 db ( 0.64 db 95%) spurious emission mixer level 2 dbm 3 dbm 3 dbm C3 dbm dynamic range, relative rbw = 3.9 khz 114.2 db (118.2 db typ) 106.0 db (111.0 db t yp) 102.5 db (107.8 db typ) 92.8 db (95.4 db typ) rbw = 100 khz 100.1 db (104.1 db typ) 91.9 db (96.9 db typ) 88.5 db (93.7 db typ) 78.7 db (81.3 db typ) sensitivity, absolute rbw = 3.9 khz rbw = 100 khz C114.3 dbm (C118.3 dbm typ) C100.2 dbm (C104.2 dbm typ) C110.3 dbm (C115.3 dbm typ) C96.2 dbm (C101.2 dbm typ) C107.3 dbm (C111.3 dbm t yp) C93.2 dbm (C99.2 dbm typ) C102.3 dbm (C108.3 dbm typ) C88.2 dbm (C94.2 dbm typ) accuracy, absolute 20 hz to 3.6 ghz 0.19 db (95%) 0.29 db (95%) 0.38 db (95%) 3.5 to 8.4 ghz 1.08 db (95%) 1.17 db (95%) 1.22 db (95%) 8.3 to 13.6 ghz 1.48 db (95%) 1.54 db (95%) 1.59 db (95%) 100 khz to 3.0 ghz 0.81 db (95%) 3.0 to 7.5 ghz 1.80 db (95%) dvb-t/h modulation accuracy dvb-t 64qam evm, ml 1 = C20 dbm, 20 to 30 c evm operating range 0 to 8% 0 to 8% 0 to 8% 0 to 8% floor 0.30% (eq on) 0.32% (eq off) 0.52% (eq on) 0.56% (eq off) 0.64% (eq on) 0.73% (eq off) 0.95% (eq on) 1.02% (eq off) accuracy from 0.35/0.66/0.70% (pxa/mxa/exa) to 1.2% 0.20% 0.20% 0.30% from 1.2 to 2.0% 0.10% 0.20% 0.20% from 2.0 to 8.0% 0.20% 0.20% 0.20% mer operating range 22 db 22 db 22 db 22 db floor 51 db (eq on) 50 db (eq off) 46 db (eq on) 45 db (eq off) 44 db (eq on) 43 db (eq off) 40.4 db (eq on) 39.8 db (eq off) accuracy from 38 to 49 db/44 db/ 43 db (pxa/mxa/exa) 2.64 db 2.20 db 2.62 db from 34 to 38 db 0.36 db 0.69 db 1.02 db from 22 to 34 db 0.25 db 0.36 db 0.48 db frequency error 2 range C100 to 100 khz C100 to 100 khz C100 to 100 khz C100 to 100 khz accuracy 10 hz + tfa 3 10 hz + tfa 3 10 hz + tfa 3 10 hz + tfa 3 1. ml (mixer level) is rf input power minus attenuation 2. 7khdffxudfvshflofdwlrqdssolhvdwwkh(90 3. wid wudqvplwwhuiuhtxhqfiuhtxhqfuhihuhqfhdffxudf
10 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview description pxa mxa exa cxa phase jitter range 0 to 0.0349 rad 0 to 0.0349 rad 0 to 0.0349 rad 0 to 0.0349 rad resolution 0.0001 rad 0.0001 rad 0.0001 rad 0.0001 rad quad error range C4 to 5 deg C4 to 5 deg C4 to 5 deg C4 to 5 deg accuracy 0.090 deg 0.090 deg 0.090 deg 0.090 deg amplitude imbalance range C5 to 5% C5 to 5% C5 to 5% C5 to 5% accuracy 0.45% 0.45% 0.50% 0.50% ber before viterbi range 0 to 1.0 10 ?1 0 to 1.0 10 ?1 0 to 1.0 10 ?1 0 to 1.0 10 ?1 ber before reed-solomn range 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 ber after reed-solomn range 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 channel impulse response (also called echo pattern) (a) selectable center and time/div (b) scale type by time or distance (c) results sorted by amplitude or time/distance (d) default echo search limit C35 db and adjustable (e) adjustable fft start position (0/8 to 8/8 gi), and mer metric displayed on the top of the view can be used as the criteria to tune the fft window (f) support pre-echo, post-echo, 0 db echo and out-of-gi echo scenarios (time range supports up to one ofdm symbol length tu with decoding on) (h) cell id (hex/dec) display dvb-t2 modulation accuracy dvb-t2 single plp, 32k fft, 256qam, constellation rotation yes, ml 1 = C20 dbm, 20 to 30 c evm operating range 0 to 6% 0 to 6% 0 to 6% 0 to 6% floor 0.27% (eq off) 0.58% (eq off) 0.72% (eq off) 1.11% (eq off) mer operating range 24 db 24 db 24 db 24 db floor 51 db (eq off) 45 db (eq off) 43 db (eq off) 39.1 db (eq off) frequency error 2 range C380 khz to 380 khz C380 khz to 380 khz C380 khz to 380 khz C380 khz to 380 khz accuracy 1 hz + tfa 3 1 hz + tfa 3 1 hz + tfa 3 1 hz + tfa 3 clock error 2 range C20 hz to 20 hz C20 hz to 20 hz C20 hz to 20 hz C20 hz to 20 hz accuracy 1 hz + tfa 3 1 hz + tfa 3 1 hz + tfa 3 1 hz + tfa 3 quad error range C5 deg to 5 deg C5 deg to 5 deg C5 deg to 5 deg C5 deg to 5 deg amplitude imbalance range C1 to +1 db C1 to +1 db C1 to +1 db C1 to +1 db ber before ldpc range 0 to 1.0 x 10 -1 0 to 1.0 x 10 -1 0 to 1.0 x 10 -1 0 to 1.0 x 10 -1 ber before bch range 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 ber after bch range 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 0 to 1.0 10 ?3 packet error rate range 0 to 1.0 0 to 1.0 0 to 1.0 0 to 1.0 1. ml (mixer level) is rf input power minus attenuation 2. 7khdffxudfvshflofdwlrqdssolhvdwwkh(90 3. wid wudqvplwwhuiuhtxhqfiuhtxhqfuhihuhqfhdffxudf
11 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview for a complete list of specifications refer to the appropriate specifications guide. pxa: www.keysight.com/find/pxa/specifications mxa: www.keysight.com/find/mxa/specifications exa: www.keysight.com/find/exa/specifications cxa: www.keysight.com/find/cxa/specifications description pxa mxa exa cxa dpc itineration times data 0 to 100 0 to 100 0 to 100 0 to 100 1-pre 0 to 100 0 to 100 0 to 100 0 to 100 1-post 0 to 100 0 to 100 0 to 100 0 to 100 miso t1 only measurements same as siso miso t2 only measurements same as siso miso t1t a comined data mer/evm rms comined 1-pre evm/mer rms c comined 1-post evm/mer rms d comined ber result e comined data per pp mer rms, evm rms, magnitude error rms, phase error rms f channel freuency response t1 g channel freuency response t2 h freuency error h i clock error h j t power dbm channel impulse response siso-sfn and miso-sfn echo pattern a selectale center and time/div scale type y time or distance c results sorted y amplitude or time/distance d default echo search limit 35 db and adjustale e adjustale fft start position 0/ to / i, and mer metric displayed on the top of the view can e used as the criteria to tune the fft window f support pre-echo, post-echo, 0 db echo and out-of-i echo scenarios g cell id he/dec display h adjustale echo display, from miso t1 group, or from miso t2 group, or from miso t1t2 dual trace, relative amplitude and delay display etween t1 group and t2 group
12 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview ordering information software licensing and confguration choose from two license types: C fixed, perpetual license: this allows you to run the application in the x-series analyzer in which it is initially installed. C transportable, perpetual license: this allows you to run the application in the x-series analyzer in which it is initially installed, plus it may be transferred from one x-series analyzer to another. the table below contains information on our fxed, perpetual licenses. for more information, please visit the product web pages. N6153A & w6153a dvb-t/h with t2 x-series measurement application description model-option additional information pxa, mxa, exa cxa/cxa-m 1 dvb-t/h N6153A-2fp w6153a-2fp dvb-t2 N6153A-3fp w6153a-3fp 1. the cxa-m only supports transportable license. visit the product web page for further information.
13 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview hardware confgurations n9030a pxa signal analyzer description model-option additional information 3.6, 8.4, 13.6, 26.5, 42.98, 44, or 50 ghz frequency range n9030a-503, -508, -513, -526, -543, -544, or -550 one required analog baseband iq (bbiq) inputs n9030a-bba required for analog baseband measurement precision frequency reference n9030a-pfr recommended electronic attenuator, 3.6 ghz n9030a-ea3 recommended 3uhdpsolohu or 50 ghz n9030a-p03, -p08, -p13, -p26, -p43, -p44, or p50 one recommended analysis bandwidth to 25, 40, or 160 mhz n9030a-b25, -b40, or -b1x one optional wideband if output n9030a-cr3 optional programmable if output n9030a-crp optional n9020a mxa signal analyzer description model-option additional information 3.6, 8.4, 13.6, or 26.5 ghz frequency range n9020a-503, -508, -513, or -526 one required analog baseband iq (bbiq) inputs n9020a-bba required for analog baseband measurement precision frequency reference n9020a-pfr recommended electronic attenuator, 3.6 ghz n9020a-ea3 recommended 3uhdpsolohuru+ n9020a-p03, -p08, -p13, or -p26 one recommended dual-core, high-performance processor, removable ssd n9020a-pc4 recommended for faster mer/ber digital processor with 2 gb capture memory n9020a-dp2 optional for faster mer/ber analysis bandwidth to 25 or 40 mhz n9020a-b25 or b40 one optional wideband if output n9020a-cr3 optional programmable if output n9020a-crp optional n9010a exa signal analyzer description model-option additional information 3.6, 7.0, 13.6, 26.5, 32, or 44 ghz frequency range n9010a-503, -507, -513, -526, -523, -544 one required precision frequency reference n9010a-pfr recommended electronic attenuator, 3.6 ghz n9010a-ea3 recommended 3uhdpsolohuru+ n9010a-p03 or p07 one recommended dual-core, high-performance processor, removable ssd n9010a-pc4 recommended for faster mer/ber digital processor with 2 gb capture memory n9010a-dp2 optional for faster mer/ber analysis bandwidth to 25 mhz or 40 mhz n9010a-b25 or b40 one optional wideband if output n9010a-cr3 optional programmable if output n9010a-crp optional n9000a cxa signal analyzer description model-option additional information 3.0, 7.5, 13.6, or 26.5 ghz frequency range n9000a-503, -507, -513 or -526 one required fine step attenuator n9000a-fsa recommended precision frequency reference n9000a-pfr recommended 3uhdpsolohuru+ n9000a-p03 or -p07, -p13 or -p26 one recommended tracking generator of 9 khz to 3 ghz or 6 ghz n9000a-t03 or t06 one optional analysis bandwidth to 25 mhz n9000a-b25 optional wideband if output n9000a-cr3 optional
14 | keysight | N6153A & w6153a dvb-t/h with t2 x-series measurement application - technical overview related literature N6153A & w6153a dvb-t/h with t2 measurement application, demonstration guide, literature number 5990-5931en N6153A & w6153a dvb-t/h with t2 measurement application, measurement guide, part number n6153-90002 N6153A & w6153a dvb-t/h with t2 measurement application, user's and programmer's reference, part number n6153-90001 web product page: www.keysight.com/find/N6153A www.keysight.com/find/w6153a x-series measurement applications: www.keysight.com/find/x-series_apps x-series signal analyzers: www.keysight.com/find/x-series application pages: www.keysight.com/find/digitalvideo digital video solution table: www.keysight.com/find/digitalvideo_solution
mykeysight www.keysight.com/find/mykeysight a personalized view into the information most relevant to you. www.lxistandard.org lan extensions for instruments puts the power of ethernet and the web inside your test systems. keysight is a founding member of the lxi consortium. three-year warranty www.keysight.com/find/threeyearwarranty keysights commitment to superior product quality and lower total cost of ownership. the only test and measurement company with three-year warranty standard on all instruments, worldwide. keysight assurance plans www.keysight.com/find/assuranceplans up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/go/quality keysight technologies, inc. dekra certified iso 9001:2008 quality management system keysight channel partners www.keysight.com/find/channelpartners get the best of both worlds: keysights measurement expertise and product breadth, combined with channel partner convenience. for more information on keysight technologies products, applications or services, please contact your local keysight office. the complete list is available at: www.keysight.com/find/contactus americas canada (877) 894 4414 brazil 55 11 3351 7010 mexico 001 800 254 2440 united states (800) 829 4444 asia pacifc australia 1 800 629 485 china 800 810 0189 hong kong 800 938 693 india 1 800 112 929 japan 0120 (421) 345 korea 080 769 0800 malaysia 1 800 888 848 singapore 1 800 375 8100 taiwan 0800 047 866 other ap countries (65) 6375 8100 europe & middle east austria 0800 001122 belgium 0800 58580 finland 0800 523252 france 0805 980333 germany 0800 6270999 ireland 1800 832700 israel 1 809 343051 italy 800 599100 luxembourg +32 800 58580 netherlands 0800 0233200 russia 8800 5009286 spain 0800 000154 sweden 0200 882255 switzerland 0800 805353 opt. 1 (de) opt. 2 (fr) opt. 3 (it) united kingdom 0800 0260637 for other unlisted countries: www.keysight.com/find/contactus (bp-09-04-14) 15 | keysight | dvb-t/h with t2 x-series measurement application N6153A & w6153a - technical overview this information is subject to change without notice. ? keysight technologies, 2013 - 2015 published in usa, april 4, 2015 5990-3569en www.keysight.com

▲Up To Search▲

Price & Availability of N6153A

	To Download N6153A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .